AWS-HDPE塑料回收晾绳机

输送到碎纸机
内置重型版本;
输送带带载控制装置，避免碎纸机过供;
可选配金属探测器，用于检测金属污染物，保护碎纸机;
带式输送机可采用PVC/橡胶材质;
带式输送机的速度由变频器控制.

优点:
切割腔内空间增加35%;
内置液压滑枕;
可变快速冲压件移动;
比传统碎纸机占用空间小 
卧式闸板;
封闭式切割室，防止物料飞出.

1. 坚持用清水清洗
2. 具有混合功能，物料三维混合
3. 材料的保留时间较长，约30分钟
4. 独立水处理系统
5. 水可以加热. 用热水预洗
6. 6、3段独立水温控制

磁选分离带可选配安装在粉碎机出料带式输送机上, 采用永磁体对黑色金属进行专制去除.

分离罐, built in stainless steel; Discharge drum; Double discharge system for “heavies”, motorized valves; With pneumatic water in-feed-valve, automatic level control via electronic feeder; With compressor blower to inject compressed air to the bottom of the tank; With working platform; 水 and energy saving design. 

Crushing with water flushing in; 3/5/7 rotor design; Knife adjustment outside chamber; Low noise. 

摩擦洗衣机作为坚韧的洗涤单元, to removes most of contaminates; Housing built in stainless steel, welded construction; Reinforced, mild steel and high speed rotor; Oversized, outside mounted bearings; Stainless steel screen, hole size 3 mm; Stainless steel feed - and discharge hoppers for the plastic flakes; 水 discharge at the bottom.

For separation of contaminants or other plastics with gravity > 1 g/cm³ from PE/PP flakes; With screw-IN and screw-OUT; Special design of inner paddles to guarantee sufficient sediment of heavy impurities; Stainless steel SUS304 body; With pneumatic water in-feed-valve, 通过电子探头自动液位控制.

对不同的物料，CQ9游戏有不同的干燥系统，挤压机或离心干燥机&管道干燥机，视客户要求而定. 对于软性材料，如薄膜，CQ9游戏可以使用挤压机或离心干燥机, 干燥后, 物料水分控制在5-8%以内, 用于硬质塑料材料, CQ9游戏可以采用离心干燥机和管道干燥机系统, 干燥后, 物料湿度将小于1%.

保证下游挤出制粒生产线不停机、稳定进料, CQ9游戏将使用缓冲筒仓来储存洗过的材料. 特殊设计，确保物料不堵塞, 在筒仓的顶部, 旋风除尘装置.

电控元件:(施耐德)、e.g. 断路器, 交流联系, 按钮开关, pilot lamp; For electrical controlling of the entire system; Safety interlock principle; All electrical units: LS, 施耐德, ABB.